How do I add post build actions in Jenkins?

How do I add post build actions in Jenkins?

Version 1.634 (as requested). Build section with Add build step drop down. Post-build Actions section with Add post-build action drop down.

How do I add post build actions?

if you need to execute a single task after the Post-build action choose single or if you have multiple tasks then choose multiple. Then choose Current build status as the run condition. And select the Worst and Best Status both as Success .

What is post build actions in Jenkins?

This feature allows user to associate shell or a batch scripts that perform some tasks on Jenkins depending on the build log output. If the log text has a match some where in the build log file, the script will execute and the post build log will append to the project build log. Java regular expression are allowed.

Where is post build action Jenkins?

1 Answer. Since you are using pipeline, the post build actions go into the pipeline code(i.e., Jenkinsfile) configured under ‘Build Configuration’ in classic view. post section can be placed either in pipeline scope or stage scope. In pipeline scope, it should be right after stages block.

How does Jenkins trigger email?

Default Email Notifier

  1. Step 1: Log in to the Jenkins Homepage. Go to Jenkins homepage.
  2. Step 2: Configure System. Click on Manage Jenkins->Configure System.
  3. Step 3: Add post-build action in your project.
  4. Step 4: Build the project and check your email.

How do I send an email after every build in Jenkins?

Configure a project to send email at every build

  1. Click “Add post-build action”
  2. Click “Editable Email Notification”
  3. Click “Advanced Settings…”
  4. Click “Add Trigger”
  5. Click “Always”
  6. Save.

Where do I put Jenkins executable commands?

Use a custom executable in a Jenkins job

  1. Copy the custom binary or shell script to the /opt/bitnami/apps/jenkins directory. For example: sudo cp /opt/bitnami/apps/jenkins/
  2. Change the permissions as shown below: sudo chmod +x /opt/bitnami/apps/jenkins/

How do I turn on email notifications in Jenkins?

Go to the Jenkins home page and click the ‘Manage Jenkins’ menu option. Then, select the ‘Configure System’ option. 7. Enter the SMTP server name under ‘Email Notification’.

How do I send an email notification if retry build is failed in Jenkins?

Select “Configure”. Select “Add post-build action” and Click “E-Mail Notification”. Enter your recipients mail address and select first option “Send e-mail for every unstable build”. Click “Save” button.

Can you send email through Jenkins?

Jenkins comes with an out of box facility to add an email notification for a build project. Step 1 − Configuring an SMTP server. Goto Manage Jenkins → Configure System. Go to the E-mail notification section and enter the required SMTP server and user email-suffix details.

How do I find out what my SMTP server is?

Android (native Android email client)

  1. Select your email address, and under Advanced Settings, click Server Settings.
  2. You’ll then be brought to your Android’s Server Settings screen, where you can access your server information.

How do I find my SMTP server name and port?


  1. Open up a command prompt (CMD.exe)
  2. Type nslookup and hit enter.
  3. Type set type=MX and hit enter.
  4. Type the domain name and hit enter, for example:
  5. The results will be a list of host names that are set up for SMTP.

How do I setup a SMTP server?

To set up your SMTP settings:

  1. Access your SMTP Settings.
  2. Enable “Use custom SMTP server”
  3. Set up your Host.
  4. Enter the applicable Port to match your Host.
  5. Enter your Username.
  6. Enter your Password.
  7. Optional: Select Require TLS/SSL.

How do I find my SMTP server port?

How to Find an SMTP Port Number

  1. Log in to the Exchange System Manager in your mail server.
  2. Click “Servername.”
  3. Click “Protocols.”
  4. Click “SMTP.”
  5. Find the icon labeled “Default SMTP Virtual Server” and right-click on the icon.
  6. Select “Properties.”
  7. Select the “General” tab and click the button marked “Advanced.”

What port is used for SMTP?

SMTP port 587

What port is RDP on?

Remote Desktop Protocol (RDP) is a Microsoft proprietary protocol that enables remote connections to other computers, typically over TCP port 3389.

How do I find my SMTP server using command prompt?

  1. Open a Command Prompt by going to Start, then click Run and search for “CMD”.
  2. In the Command Prompt type the following: ping(SMTP Server Host Name).
  3. When you ping the Host Name, the results do not matter but it will produce an IP Address for the SMTP Server.

How do I find the IP address of my server?

First, click on your Start Menu and type cmd in the search box and press enter. A black and white window will open where you will type ipconfig /all and press enter. There is a space between the command ipconfig and the switch of /all. Your ip address will be the IPv4 address.

How do I get a free SMTP server?

Free SMTP Servers – The Best Onc To Choose

  1. SendinBlue – 9000 Free Emails Every Month Forever.
  2. Pepipost – 30,000 Free Emails | 150,000 Emails @ Just $17.5.
  3. Pabbly – Unlimited Emails | 100 Subscribers.
  4. Elastic Emails.
  5. SendPulse.
  6. Mailify.
  7. MailJet.
  8. Amazon SES.

How do I connect to a different RDP port?

To Alter the Port on the client side:

  1. Go to the Start menu and click on Run.
  2. On the Run menu type MSTSC and click Enter.
  3. In the RDP window, in the Computer box, scroll to the computer name or IP to which you wish to connect.
  4. Add a “:Port” (without the quotes) where “Port” is the decimal value of the destination port.

How can I tell if RDP port is open?

Open a command prompt Type in “telnet ” and press enter. For example, we would type “telnet 192.168. 8.1 3389” If a blank screen appears then the port is open, and the test is successful.

How do I enable RDP ports?

Step 2: Open Remote Desktop port (port 3389) in Windows firewall. Go into the control panel in your computer and then into ‘System and security’ and then into ‘Windows Firewall’. Click ‘Advanced settings’ on the left side. Ensure that ‘Inbound Rules’ for Remote Desktop is ‘Enabled’.

How do I enable RDP ports in Windows 10?

Change Remote Desktop (RDP) Port in Windows 10

  1. Open the Registry Editor app.
  2. Go to the following Registry key. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp.
  3. On the right, modify the 32-Bit DWORD value “PortNumber”. By default, it is set to 3389 in decimals.
  4. Open the new port in Windows Firewall.
  5. Restart Windows 10.

Is it safe to open RDP port?

RDP should never be open to the Internet. The internet is continuously being scanned for open port 3389 (the default RDP port). Even with a complex password policy and multi-factor authentication you can be vulnerable to denial of service and user account lockout.

How do I enable UDP ports?

Select Advanced settings and highlight Inbound Rules in the left pane. Right click Inbound Rules and select New Rule. Add the port you need to open and click Next. Add the protocol (TCP or UDP) and the port number into the next window and click Next.

How do I find my UDP port?

How to find your port number on Windows

  1. Type “Cmd” in the search box.
  2. Open Command Prompt.
  3. Enter the “netstat -a” command to see your port numbers.

How do you find out which UDP ports are open?

To view the TCP/UDP open port state of a remote host, type “portqry.exe –n [hostname/IP]” where [hostname/IP] is replaced with the hostname or IP address of the remote host.

How can I tell if UDP port 500 is open?

How to check UDP port is open or not?

  1. Open a packet sniffer.
  2. Send a User Datagram Protocol (UDP) packet.
  3. After sending the UDP packet, if you receive ‘ICMP port unreachable’ message, then the UDP port is closed.
  4. If not, then the UDP port is open or something is blocking the ICMP.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top